Club 80-90 Forums

I know this should be in the tech section but as its on a Syncro Doka I thought I would get a more informed response on hear

The adjustable rod on my clutch peddle badly needs adjusting but I am beat as to how your supposed to do this one.
The hydraulics are all well and good it is just ware on the adjustable rod but I cant see how you get to it to turn the 13mm locking nut and take up the free play.
Seen a few other Syncros in need of this so I take it there may not be an easy job ahead of me....?

Have just done mine, I used garyd's write up on this thread
https://club8090.co.uk/forum/viewtopic.php?f=37&t=97422" onclick="window.open(this.href);return false;
Quite a easy job really, you just need a 15mm box spanner

Make sure the clevis pin hasn't worn the arm first.