Club 80-90 Forums

hi all i have looked on wiki but can find anwsewr what plugs for 1600ct are thay long or short reach? the plugs i have taken out are long reach ngk
but im having engine running problems and eleminating every thing my engine has had new heads fiited by prev owner i have 19 fins on barrels ???
any one know??

A breaker next to me recently had a ct motor off me. That had 19 fins on the barrels, pistons had std and 85.45 stamped on the top. Spoke to someone else about barrels and he said there should be 20 fins if I remember right. As for plugs I'm not sure.

Jim

Just had a look, 2 types of plugs fitted to ct motors, short or long reach, w7ac or w8cc the latter being long reach. W7 is 12mm long thread, w8 is 19mm long thread.

Jim

Hello,

Long reach Bosch W 8 CC for CT engine..

Cordialement,

[quote="jimpainter"]A breaker next to me recently had a ct motor off me. That had 19 fins on the barrels, pistons had std and 85.45 stamped on the top. Spoke to someone else about barrels and he said there should be 20 fins if I remember right. As for plugs I'm not sure.

Jim[/qu
yep your right recounted 20 cooling fins on barrel a standard set up then should be short reach plugs

thank sarran always correct thank you