Club 80-90 Forums

Hi everyone,

Just taken my Foster and Day Coachbuilt T25 in for an MOT and the exhaust system needs replacing. However after looking at the replacements from Brickwerks and JK it appears that someone may have installed a non standard exhuaust. Its a 2.1 injection water cooled engine from 1987 but if you look at the photos all the pipes come out of the back of the exhaust like an 'early' exhaust whereas the silencer looks like a 'later' type and is supported. Ive spoken to Brickwerks and they say its strange to have flexi connectors fitted as well.



Obviously worried which replacement I should buy and if it doesnt fit Ill be left with an expensive stainless steel piece of art for the front room!

Any thoughts very much welcome

Cheers,
Chris

do you want to replace all of it?
you have a syncro engine mount bar..is your van a syncro?

kevtherev wrote:do you want to replace all of it?
you have a syncro engine mount bar..is your van a syncro?

Hi Kev,
Thanks for the reply. MOT garage says to replace it all. Is a syncro a 4wd?

Cheers,
Chris

yes it is

my apologies I think I am mistaken about the mount not sure if it is a syncro.

but you can fit an early exhaust system from Brickwerks... or a late system as you have the silencer saddles

late system on mine



the late system is quieter..

I have two 2.1 engine mount bars sitting in my shed . both for sale !!!

neil.

Pretty sure its not 4wd. Spoke to Brickwerks and its a long wait (8 weeks) for one of theirs so was looking to go for this one from JK
http://www.justkampers.com/vw-t25-parts ... -2100.html" onclick="window.open(this.href);return false;

Just concerned that with the pipes coming out of the end and curving around, will there be enough room by the side of the engine (as why would they have changed it currently?)

these people have a good reputation, i think fairywinds has this one and is very happy.

http://www.vwspeedshop.com/product.php?productid=16733" onclick="window.open(this.href);return false;

https://club8090.co.uk/forum/viewtopic.p ... z#p7589295" onclick="window.open(this.href);return false;

pionte wrote:these people have a good reputation, i think fairywinds has this one and is very happy.

http://www.vwspeedshop.com/product.php?productid=16733" onclick="window.open(this.href);return false;

https://club8090.co.uk/forum/viewtopic.p ... z#p7589295" onclick="window.open(this.href);return false;

I have one of the vwspeedshop exhausts and really rate it

Hi Daisy & Pionte,

Thanks for the link Ill have a look into that one Is the silencer shorter on that model - do you still use the two clips to hold on?

chrischall wrote:Hi Daisy & Pionte,

Thanks for the link Ill have a look into that one Is the silencer shorter on that model - do you still use the two clips to hold on?

Yes silencer is shorter and no you don`t use the clips.
I got Steve at Gasure to fit mine and he as always did a brilliant job.
Good luck

pionte wrote:these people have a good reputation, i think fairywinds has this one and is very happy.
http://www.vwspeedshop.com/product.php?productid=16733" onclick="window.open(this.href);return false;

I have one fitted too (about a year ago) and I too am happy with it, but note, they are a bit noisier than the std system, (especially when new and not yet sooted up a bit), but not boy racer loud. This is worth bearing in mind, as some folks would prefer the quiet purr of a std late type one as per the Brickwerks item