Club 80-90 Forums

I've just finished my rustoleum roller paint job and some paint has seeped on to window and door rubbers, My first thought was a touch up pen from halfords (black of course)Anyone any tips for either removing or painting over it? Help appreciated1

isopropyl alcohol.......scrub scrub scrub..

A wee drop of petrol on a cloth might do it or if you are brave enough paint thinner again on a cloth

White spirit , or leave to dry then it might just flake off using your finger nail .

you mean you rollered it with the windows in?
mm

Knowing me I could have rollered it with the windows down!! sat on the wall outside my house my many neighbours on passing offered the following advice, leave it as it is, you'll only make a b****cks of it, use back to black, use a stanley knife, use matt black nail varnish as you get a brush with it, use black permanent marker and finally someone gave me a tin of matt black enamel and a little brush. I'm torn between deciding on doing all of them on different bits and giving you the feedback or using my wife's nail varnish remover (acetone) and being very, very, very careful not to get caught by her using it. we'll see. If all else fails I'll paint my nails black, draw a funny moustache on my face with the marker pen, sniff the acetone and do nothing. Thanks for the suggestions though!

sounds a spliffing idea
mm

Naked flames next to acetone!! I think not, perhaps after....

Stanley knife dragged backwards across surface will generally remove it and/or weaken it enough for it to come off with solvent. Thats how I did it.