Page 1 of 1
Anyone stripped a 1.7D (KY)?
Posted: 01 Oct 2006, 20:39
by Simon Baxter
Heh, this doesn't happen very often does it!
Im asking a question.
Has anyone ever had a 1.7D in pieces?
Could you tell me if the bores have oil spray jets?
I never see the 1.7D's in the garage nevermind have them in pieces!
Posted: 02 Oct 2006, 09:15
by Tex Ritter
If you've got one in pieces at the moment, and the design is anything like the HGVs then the spray jets will be attached near to the bottom of the cylinder bore....very easy to damage by the way.
Or if you drop the sump, you should be able to see them, or not, as the case may be.
Tex Ritter
Posted: 02 Oct 2006, 09:21
by HarryMann
ETKA Implies not
Posted: 02 Oct 2006, 17:36
by Simon Baxter
Tex Ritter wrote:If you've got one in pieces at the moment, and the design is anything like the HGVs then the spray jets will be attached near to the bottom of the cylinder bore....very easy to damage by the way.
Or if you drop the sump, you should be able to see them, or not, as the case may be.
Tex Ritter
I think you misread the question old bean!
Posted: 02 Oct 2006, 17:37
by Simon Baxter
HarryMann wrote:ETKA Implies not
I only got a small monitor, ETKA chopped the important bit off for me!
So, are you positive they have no spray jets?
Posted: 02 Oct 2006, 21:00
by Tex Ritter
Simon Baxter wrote:
I think you misread the question old bean!
I sure did...DOHH!
Posted: 03 Oct 2006, 06:19
by Russel
The few i have stripped for parts havent.