Page 1 of 1

Holdsworth won't start

Posted: 30 Jul 2013, 17:23
by nesty
Can anybody help with this. I have a T25 Holdsworth.

It been starting perfectly fine. I took it out today and started it about 2 times in my journey etc. Then came back after 30 mins then it wouldn’t start. It was like a like clicking noise coming from the fuseboard.

After about the 10th attempt I got it going. Ran it around for 10 mins then it re-started fine. I got home went to re-start it, now it’s dead. Nothing happens when you turn the ignition no clicking or anything.

I have digital volt meter and when you turn the key naturally the current dive down but now it goes down to -0.25.
The battery looked like it was receiving charge ok on way home in 13.90V. Though apparently at stand still it’s 12.6V

Is this start motor related you think?

Re: Holdsworth won't start

Posted: 30 Jul 2013, 17:27
by pionte
could be a poor earth connection. , check battery connections are tight, then there is another earth from the gearbox to the chassis, worth checking that it is clean and tight and not connected to rust !

Then I think the starter motor itself has an earth... not sure about this exactly.