Page 1 of 1
Taking one area of the dash off
Posted: 29 Sep 2006, 17:14
by funkypaul
Hi. Had a quick look at the Wiki and don't think this is on there, apologies if it is. Got a bit of a short circuit and I'm trying to track it down. To do this need to take a bit of the dashboard area off but have no idea how to do it; there are no obvious screws to remove or anything.
Here's a picture of what I'm talking about...
Any help would be great, thanks,
Paul
Posted: 29 Sep 2006, 17:21
by T'Onion
PULL IT
Posted: 29 Sep 2006, 17:43
by DiscoDave
more specifically, on the sides at the top are some vents, stick your pinkies in there and then pull, like the dash pod it will make a cracking noise follewed shortly by cursing anthe thought of *"pooh" i've bust it* or at least mine did till i bust it!!
Posted: 29 Sep 2006, 18:42
by funkypaul
Ok, mixed sucess. I can now relate to your experience Dave...it's off but I have a triangular shard of plastic which has broken off...now where's that super glue?
Posted: 29 Sep 2006, 19:51
by Hacksawbob
I find refitting cuses more damage than removal, theres some slidy thinngs which need aligning