Page 1 of 1
DK gearbox filler plug - what size tool ?
Posted: 29 Sep 2006, 15:28
by ghost123uk
Does anyone know what tool is required to undo the filler plug on a DK gearbox ?
filler plug size
Posted: 29 Sep 2006, 15:31
by Fritz
17mm hexagon allen key/ socket, come to mind for some reason.
Regards
Fritz,,,,,,
Posted: 29 Sep 2006, 15:35
by T'Onion
and undo the filler before you undo the drain
Posted: 29 Sep 2006, 15:39
by Mocki
dk gearbox is Aircooled for a CU iirc...... but the tool is 17mm hex and like mark says, undo fill be for drain.......ot you have to turn the van on its side to refill!
Posted: 29 Sep 2006, 16:25
by ghost123uk
Aye Steve, Mark and all...
That s why I asked as I wanted to make sure I had the correct tool, and that the filler plug came out
before draining the oil !!
E D I T = btw, my 1.9 DG has a DK box bolted on, I understand these are good boxes and I am told were used on some of the Porsche's.
Cheers folks
Posted: 29 Sep 2006, 16:52
by sixsprings
ghost123uk wrote: has a DK box bolted on, I understand these are good boxes and I am told were used on some of the Porsche's.
Cheers folks
as i understand, the strongest and with a high top ratio. but porshes? i don't know about that...
Posted: 29 Sep 2006, 17:45
by DiscoDave
chad wrote: i don't know
Posted: 02 Oct 2006, 09:01
by ghost123uk
DiscoDave wrote:chad wrote: i don't know
Neither do I
Does anyone else not know ?