Page 1 of 1
Oil switch location
Posted: 23 Jul 2013, 14:38
by sternal
Hi where is the location of the oil pressure switch ??
Is it a hard job to do ?
Will I need to drain all oil ?
Many thanks in advance
Re: Oil switch location
Posted: 23 Jul 2013, 14:48
by KINGPRAWN
Which engine??
Re: Oil switch location
Posted: 23 Jul 2013, 15:02
by sternal
2litre Aircooled
Cheers
Re: Oil switch location
Posted: 23 Jul 2013, 15:53
by KINGPRAWN
Not sure about AC but the WBX has one between the pushrods LHS and one between the pulleys .. Bothe a cow to get to... And no need to drain oil... You should see a wire going to these places perhaps?
Re: Oil switch location
Posted: 23 Jul 2013, 15:59
by tobydog
On top of the engine left of center, trace the wire from it.
Easy to do, you need a box spanner (about 35mm ish from memory) to clear the terminal.
No need to drain the oil.
Mick.
Re: Oil switch location
Posted: 23 Jul 2013, 18:08
by bigherb
Just behind the distributor.
Normally a 22 mm deep socket sometimes a 24 mm depending on who made the switch.
Re: Oil switch location
Posted: 23 Jul 2013, 18:14
by sternal
wow !
thanks for all your help part ordered
thanks guys
