Page 1 of 1

No Reading on Temperature Gauge

Posted: 30 Jun 2013, 15:58
by Jdavies788
Hi,

We have a 1989 1.7 diesel T25, the flashing lights work when in the start position, but then get no reading or needle movement. Checked wire connector to temperature sender and earthed to battery with a circuit tester....no light!.....Any ideas.

Thanks

Re: No Reading on Temperature Gauge

Posted: 30 Jun 2013, 20:01
by kevtherev
earth the sender wire to the engine
it should send the gauge to the top
if it doesn't then the sender is faulty

the red light is a low coolant level indicator

Re: No Reading on Temperature Gauge

Posted: 21 Jul 2013, 17:09
by Jdavies788
Thanks nothing when earth sender wire to van, will try a new sender

Re: No Reading on Temperature Gauge

Posted: 21 Jul 2013, 17:29
by dbz864
Which sender are you removing the wire from and earthing?