Club 80-90 Forums

Hi All
Just bought my first T25 1.9 Petrol. Running fine but have noticed oil coming from up from breather hose connecting to carb air intake. Local garage suggested changing breather but I don't know what is inside it or if there is anything that may need changing (filter element?). Can't find any reference to this with parts suppliers. Any ideas on what may be causing the oil to feed through? Thanks

Inside the breather there is a baffle and a mesh (presumably the idea is for oily vapour to condense and drip back into the crankcase) anyway, take the black tower off (4 M6 nuts/washers) stuff the hole in the engine with clean rag clean out the tower using petrol or diesel, allow to dry. Refit making sure nothing drops into the crankcase and removing the clean rag. Seal the base to prevent oil leak. Refit hose to beret ... these are often in really poor nick and collapse inwards. This is a new one .. http://www.brickwerks.co.uk/index.php/t ... bx-dg.html .

Oh and welcome to the forum

Ian.

Thanks Ian. I will put on the list to do this week end.

Replace the o-ring seal under the tower too. it will no longer look like an o-ring.
Pm me your address and i will send you an o-ring for free as a welcome to the forum