Club 80-90 Forums

Hi all. Im having trouble finding finding a clutch fly wheel for my 1988 2.1 injection t25. Thing is they no longer make them, ive try the usual lot. I/e just kampers, vw heritage, and the like, the guy's at t25direct might have one and wagon build might allso but i have to call them back on Monday. Does anyone know of any more places i could try that ive not thought of. Oh by the way its a 5 speed box if that help's. Thank's Guys.

Have you tried http://www.partsemporium.co.uk/" onclick="window.open(this.href);return false;

Thank's for that Mocki.
Ive just had a look, they don't have one on the web but ill phone them on Monday just in case. Thank's again.

hi is the DG flywheel the same if so I have a spare if you like.

Hi. Im not sure if the dg is the same, mine's a 2.1i dj. Im more used to a Morris Minor so im feeling a bit out of my depths with this one, ill ask the garage guy on monday and let you know. Thanks for the offer it would realy help.

Could be....as long as the flywheel came off a late DG these had the same clutch and flywheel as pre-April 89 MV/DJ (see vin number)

Some info off Brickwerks website gives an indication based on the clutch size:
228mm 3 piece clutch kit to suit later 1.9l WBX engines and earlier 2.1l WBX engines.
If you have a DG with a 228mm clutch it's this one!
If you have a MV/DJ before april '89 (VIN 24-K-097046) then it's this one!

Martin

hi whats the problem with your flywheel,the reason I ask is you can have it refaced by an engineering firm,i had mine done and only cost 50 quid but I have the spare one if you want it is a late DG with a 228 face.

Hi all thanks for all your help with this. Hopefully ive found one now,its from t25 direct. The problem with mine is that its got small cracks in it, if it was put back as it is then it might judder so it seemed best to replace it. Now fingers crossed and hope all goes well and all stays well for a long while.