Club 80-90 Forums

Hi everyone
Have got a really bad oil leak on my 1900cc petrol engine. It looks like its coming out of the bell housing.I've been told it could be the crank oil seal. If so how hard is it to do? Is it an engine out job? Or could it be leaking from some were else? Need to sort it quick so any help would be appreciated.

I've had to replace the oil pressure switch a couple of times on my 1.9 dg, that usually announces its failure in a very messy way...but at least it is easy and cheap to fix. Hope yours is too

cheers andi
will check that out mate. Were would i locate the oil pressure switch,and is it hard to replace?

If the oil stinks, it'll be the gearbox input shaft seal (gearbox out), if it seems like engine oil, it'll be flywheel oil seal which means, although fairly easy to do, its not a job you can do without engine on the floor. If I ever take an engine out, I change that seal regardless. An annoying job, but plod on and you'll get it sorted.

Hope you get it sorted without too much hassle.

Could you go and delete your duplicate thread please, it causes confusion