Club 80-90 Forums

Is there any reason why I couldn't/shouldn't use a motorcycle radiator from a enduro bike that has a cooling fan attached as an extra oil cooler.....

Don't know, but xriss has a very nice setrab oil cooler for sale. Very good quality

I would say no as the oil pressure if working corectly will be 2 bar and above ( mine when cold stisaround 4.5bar) Where as to the cooling system should operate aroud 1 bar, with out knowing what the rad is rated too pressure wise, I would say its not a good idea to use it, also the input and out of the rad may prove problomatic

Neil

axeman wrote:I would say no as the oil pressure if working corectly will be 2 bar and above ( mine when cold stisaround 4.5bar) Where as to the cooling system should operate aroud 1 bar, with out knowing what the rad is rated too pressure wise, I would say its not a good idea to use it, also the input and out of the rad may prove problomatic

Neil

I did wonder about the flow restriction???