Club 80-90 Forums

which colours energise the solenoid,
mm

Red with black stripe.

thought so, you knows what im trying to avoid dont you
mm

Looking in the Haynes ?

Or is it worried about getting the pages dirty

no ,im out and about so going by feeble memory
1.6d wires from ign sw are
1 x heavy red
1 x heavy red with black
1 x red with black (thinner)lol
1 x black with yellow
2 x black
which is which
also have disconnected/cut brown with black trace coming from the plug at 6 oclock on the coloumb
mm

Looking at Haynes now (Lewis on TV = seen it before but swmbo hasn't )

It is the thicker Red / Black that goes to the solenoid, trying to figure out where the thin one goes, bliddy Haynes !

Mine is a petrol Haynes, though that wire will be that same colour (99% sure of that).

1 x heavy red =Battery positive
1 x heavy red with black =Starter solenoid
1 x red with black (thinner) =Glow plug relay
1 x black with yellow =X terminal to lighting switch and X relief relay on relay plate
2 x black =Ignition terminal to relay plate and instruments

You may also have a grey wire for parking lights going to the stalks ? I can let you know exactly where they go to on the relay plate if you let me know the engine/year.

excellent thanks, traced it to the glow cable it had been joined by a previouse owner and had given way,
mm