Club 80-90 Forums

Hi there
Don't remember introducing myself so hello folks, I'm hoping someone can answer this easily enough.
I'm trying to replace the nylon ignition switch on the steering column and having problems removing all the bits.
As you can telL, I ain't no mechanic but have followed the Haynes manual as best I could till I got stuck.
I have removed steering wheel and indicator switches and am stuck getting the steering lock barrel off. ive removed the Allen key bolt off the steering lock barrel, but it ain't budging. Does it need a swift kick or am I missing something? Hopefully the pic should help explain what I mean.
The nylon ignition I'm replacing is on the dash...


Thanks a lot
Ian

https://club8090.co.uk/wiki/VW ... ion_Switch

It should explain why you're struggling.

Thought I'd looked in the wiki already. Will try it tomorrow. thanks CovKid

Ian.....you need to insert your ignition key and turn it to retract the steering lock paw...then the whole lot will tap upwards and give you access to the single pozi screw holding the ignition switch from underneath.



Martin

California Dreamin wrote:Ian.....you need to insert your ignition key and turn it to retract the steering lock paw...then the whole lot will tap upwards and give you access to the single pozi screw holding the ignition switch from underneath.

Martin

Cheers, that did it. Needed a bit of a thump to slide it off.

And 25 days in which to do it

I see why CovKid uses the policeman icon now

Don't be too harsh on me. Tis all in fun. What happened for four weeks anyway.

Nowt, I just forgot to reply