Page 1 of 1
T25 bodywork - (north) London - anyone good?
Posted: 01 Feb 2013, 16:06
by clift_d
We've got some corrosion on the offside front wheel-arch by the seat-belt mount on our Westy Club Joker, which we probably need to get fixed before we put it in for it's MOT in a couple of months. It probably needs a welding job i.e. cut out and replace the rusted flat section at the top of the arch, and finish properly.
Does anyone have any recommendations for a good bodyshop that could do this i.e. someone who understands T25s? Ideally someone local to us in north-east London but we're happy to travel further for a sensitively and properly done job.
Re: T25 bodywork - (north) London - anyone good?
Posted: 01 Feb 2013, 17:43
by waltraud
Bill at Westgate motors, Westgate st, Hackney. He's seen many a T25, I've seen his work with photos and in the flesh.
Re: T25 bodywork - (north) London - anyone good?
Posted: 01 Feb 2013, 17:51
by jamesandtheopenroad
Chris Cross Motors in Palmers Green or Beetlemania in Muswell Hill.
Re: T25 bodywork - (north) London - anyone good?
Posted: 01 Feb 2013, 21:51
by waltraud
Chris is great but much more £ than Bill for resto work.
Re: T25 bodywork - (north) London - anyone good?
Posted: 27 Jun 2013, 09:55
by clift_d
Just for other's reference, we eventually went to Bill at Westgate Motors - 020 7241 1233 - E8 3RN.
Bill's got an old school garage in several railway arches near London Fields, and they did a nice tidy job replacing the area at the top of our front offside arch, all properly finished for a very reasonable price.
Re: T25 bodywork - (north) London - anyone good?
Posted: 27 Jun 2013, 18:53
by Plasticman
Ahhhh under the arches , i like that
mm
Re: T25 bodywork - (north) London - anyone good?
Posted: 28 Jun 2013, 21:18
by edoh
arches repaired - under the arches
don' get much better than that

Re: T25 bodywork - (north) London - anyone good?
Posted: 28 Jun 2013, 21:28
by clift_d
I'll pitch it up and you can hit it out of the park

Re: T25 bodywork - (north) London - anyone good?
Posted: 28 Jun 2013, 21:39
by edoh