Page 1 of 1

Charging relay

Posted: 05 Sep 2006, 14:31
by Dubstar
So there I was, changing the relay in the leisure battery box on my 1981 Joker. And lo and behold, it worked. The charge from the alternator was getting to the leisure battery and the accessory electrics all started working. Great. Until I put the leisure battery back in and pulled out all the wires from the back of the relay. Nice!! I figured out 2 of the wires-the earth and the ignition switch, but does anybody know which terminals the other 2 wires left go on? The leisure battery wire and the other thick wire?And next time I'll be more carefull putting the battery back in. Or I'll get a smaller battery! :D

Posted: 05 Sep 2006, 15:04
by Mocki
If you go look in the WiKi ^^^^^ up there^^^^ you will see this
Image on

this page *click here*

Relays have pin numbers, 85 and 86 need the signal (ignition / alternator live) and earth (neg 12vdc) and 87 and 30 the feed and supply wires.[/url]