Page 1 of 1
both heater cables.
Posted: 12 Dec 2012, 14:50
by paul lambert
Hi,looking for a bit of advice,i`ve recently fitted new heat risers and pods on my 1982 Aircooled.(previous owner had removed them for some reason)now i need to fit new cables( previous owner snipped them off ).is the fitting of new cables a straight forward job,or do i need my bumps felt..
PS,does anyone know where i can get a new previous owner from. ?
many thanks
Paul
Re: both heater cables.
Posted: 12 Dec 2012, 17:43
by Footprint
It's not that difficult a job, (I can do it - thus it can't require too much nous ), but is a little fiddly, examine the job carefully before you start and it won't seem so hard once you get the spanners out.
paul lambert wrote:PS,does anyone know where i can get a new previous owner from?
If only. Should you find a way of arranging this I suspect there'll be plenty of takers .
Re: both heater cables.
Posted: 13 Dec 2012, 14:16
by paul lambert
Footprint wrote:It's not that difficult a job, (I can do it - thus it can't require too much nous ), but is a little fiddly, examine the job carefully before you start and it won't seem so hard once you get the spanners out.
paul lambert wrote:PS,does anyone know where i can get a new previous owner from?
If only. Should you find a way of arranging this I suspect there'll be plenty of takers .
thanks for that footprint,i`ll give it a go tomorrow.
cheers
Paul