Page 1 of 1

fog lamp on import Wiring diagram

Posted: 21 Sep 2012, 13:47
by wahvan
After 7 years or so I have just failed an MOT on a missing fog lamp. I have modified the RHS bulb holder and tracked down a dashboard switch.
However, none of the wiring is there (I know some have it just not wired up). Does anyone know where I can get hold of a wiring diagram for the back of the fuse box? I'd rather wire it up as it should be and a diagram will save me the time chasing around the fusebox with a multimeter. (I think rear fog lamp uses the #6 fuse.)

Thanks.

1988 KY engine 1.7d

Re: fog lamp on import Wiring diagram

Posted: 21 Sep 2012, 14:16
by Oldiebut goodie
Have you checked to see if the wiring is there for the LHS one?

Re: fog lamp on import Wiring diagram

Posted: 21 Sep 2012, 14:37
by wahvan
Yeah, that is the only bit of fog light wiring there is but it only goes from lhs to engine bay junction box, where it just sits unconnected. There is nothing coming from the front into the bay that is not used as far as I can see. So am pretty sure I need to do all wiring from switch to fuse box to engine bay.

Re: fog lamp on import Wiring diagram

Posted: 21 Sep 2012, 15:01
by wahvan
AH! just found this on the wiki: VW_Electrics_fuse_box has it on fog lamp!