Club 80-90 Forums

Hi everyone, I have just battled with the rear seats in my caravelle and i'm not 100% sure that they are correctly fitted. The caravelle was a camper and i'm putting it back to a caravelle so i didnt remove them in the first place or have them at all, I bought them off that auction site and they came with the fittings but i'm a bit of a numpty with these things unless they are really straight forward which they probably are.....

I could do with some photos of the side brackets and photos of what bolts in where.....Told you i'm a numpty

Its the rear bank of 3 by the way.

Thanks in advance guys

Here's atleast one image of how the standard caravelle seat is fitted (lower part folded forward), hope it helps!

Sebastian S wrote:Here's atleast one image of how the standard caravelle seat is fitted (lower part folded forward), hope it helps!

Thanks mine is nothing like this back to the drawing board and looks like i am missing a bracket....
Thanks again
Jason

If you are talking about the plates with the pins which the back of the seat hook over then this photo may help? (The plates are in place but the "pins" are missing)


seatbelt mounts by Larfinn, on Flickr

The circled marks are the seatbelt mounts. On the post above the bracket for the seatbelt is unusual, if you are looking to fit seatbelts to the back seat then check the wiki for the various different options but the seatbelt reels are usually further back in the van.

randiandipandi wrote:If you are talking about the plates with the pins which the back of the seat hook over then this photo may help? (The plates are in place but the "pins" are missing)


seatbelt mounts by Larfinn, on Flickr

The circled marks are the seatbelt mounts. On the post above the bracket for the seatbelt is unusual, if you are looking to fit seatbelts to the back seat then check the wiki for the various different options but the seatbelt reels are usually further back in the van.

Thanks Mate