Page 1 of 1

Anyone got a dg 1900 w/shop manual nearby

Posted: 17 Aug 2006, 15:10
by OB1
Been a bit of a numpty and dont know firing order and which cylinder No is which on a 1983 1900dg water cooled engine (Lost workshop manual )
Any replys gratefully received
OB1

Re: Anyone got a dg 1900 w/shop manual nearby

Posted: 17 Aug 2006, 16:47
by Grun
OB1,
Firing order 1-4-3-2 (I always remember it as 4-3-2-1 and then start with 1, if that makes sense :roll: )
Number one cylinder is front right, 2 rear right
3 front left and four rear left. Front being front of van or clutch end.

Mike

Re: Anyone got a dg 1900 w/shop manual nearby

Posted: 17 Aug 2006, 18:05
by OB1
Grun wrote:OB1,
Firing order 1-4-3-2 (I always remember it as 4-3-2-1 and then start with 1, if that makes sense :roll: )
Number one cylinder is front right, 2 rear right
3 front left and four rear left. Front being front of van or clutch end.

Mike
Many thanks - that should get me sorted and then must have good look for book
This type of info needs putting on the Wiki thing if only i wus that clever

OB1

Re: Anyone got a dg 1900 w/shop manual nearby

Posted: 17 Aug 2006, 18:20
by Grun
OB1,
A good place for info on line is Here
Click on 'information' on the home page. Simon Baxter has done a good job.
Mike

Posted: 18 Aug 2006, 20:39
by OB1
T3teedubya wrote:There is a little diagram of the plug lead layout in Haynes manual but strangely not in Bently's.
Thanks- Just out of interest how much room does your lpg take up?
OB1