Page 1 of 1

twin square lights

Posted: 25 Jul 2012, 14:15
by Dazco
Im just putting everything back on the van after a bit of a revamp.
Ive put the lights back in and im not sure whether they are working as they should.
The outer oblong ones work fine on parking dip and main, its the inner square ones that im not sure about.
Are they fog lights or just additional driving lights.
should they operate as front fog lights and should therefore come on when fog light is on?
Rear fog light works fine but im getting nothing from the front.
Fog light switch has 2 positions . Rear fog comes on on second position
Ta , daz

Re: twin square lights

Posted: 25 Jul 2012, 15:00
by 1664
inner square ones are full beam lights

Re: twin square lights

Posted: 25 Jul 2012, 18:12
by Dazco
Thanks 1664. That narrows it down a bit. Is it normal then to have main beam working on the larger outer light units as well then?

Re: twin square lights

Posted: 25 Jul 2012, 21:36
by Hacksawbob
yes all 4 lights are on when you are on full beam.

Re: twin square lights

Posted: 25 Jul 2012, 23:24
by Dazco
Cheers mate ill try and get em sorted tomorrow. :ok

Re: twin square lights

Posted: 26 Jul 2012, 14:30
by California Dreamin
Got to say that mine are 'spectacular' now I've relayed them with their own 4.5mm feed wires. That together with Osram Nighbreaker Plus bulbs and I am quite frankly amazed at the difference.

And yes, all four come on with full beam....outters only on dip.

Martin

Re: twin square lights

Posted: 26 Jul 2012, 14:40
by Dazco
re wired them this afternoon , some dodgy soldering had been done sometime in the past.
once its through the MOT ill look at re wiring all of them, sort the mess out , Cheers.
I checked the voltage at the bulb end and its around 9.5 /10 volts so getting alot of voltage drop.

Re: twin square lights

Posted: 26 Jul 2012, 14:54
by California Dreamin
some good feeds and relays sorts out that.....really worth doing...

Martin