Club 80-90 Forums

Hi all

Does anyone know where I can get the plastic interior trim that runs inside the sliding door on an '89 Auto-Sleeper please? Thanks.

Is that an actual photo of the trim fitted to your Camper? If so, looks to me to be the wrong way round. As to a supplier, I have no clue, but would be interested in one myself.

I think vanwurks do a stainless or ali replacement .

http://www.vwheritage.com/vw_spares_Bea ... try_GB.htm" onclick="window.open(this.href);return false;

this i thinks

Yes the photo is from my van - it was split when i bought it back in November and has been tripped over so many times needs replacing now! Stainless steel sounds perfect thanks, will contact Vanwurks and check which way it need to be fitted! Thanks for your help!

http://www.vanwurks.co.uk/stainless-ste ... floor.html" onclick="window.open(this.href);return false;
i think thats the one.

Im after exactly the same thing, mine is split and is a trip hazard now

annavr6@vwheritage wrote:http://www.vwheritage.com/vw_spares_Bea ... try_GB.htm

this i thinks

No its not - thats the plastic trim for the top rail on the inside to reduce the thud as your head collides with the track . Well it was when I clicked the link.

Dazco has it though. http://www.vanwurks.co.uk/stainless-ste ... Bd4HaAeKQM" onclick="window.open(this.href);return false;

For thicker floors: http://www.vanwurks.co.uk/stainless-ste ... Bd4eKAeKQM" onclick="window.open(this.href);return false;

ive been looking at just using some Alluminium right angle . should cost about a tenner

We've used aluminium stair edge, slightly more expensive, but looks good, non-slip and hard wearing.

Thanks all, I went for the thick floor stainless steel one from Vanwurks, will post a pic when it's fitted!

Mmmm, well that didn't work!

The Vanwurks stainless 'high floor' trim doesn't seem to be right...Fitted how I think it's suppose to fit, the bottom lip (on the right of this photo) is way too wide meaning the door won't close eg



or if you move it up so that bottom lip fits, the upper lip is way too high above the carpet eg



and from the other side



It's not just me(!), I took it to Chris Cross Motors who said it won't fit either...I can't see how it would fit any van not just mine. Confused!

Any suggestions at all please??

I bought some regular carpet edge (the metal type) and fitted that. Cheap and effective.

Have you tried Auto-Sleeper to see if the original one is still available? I would rather put the original one back on mine

im in the same boat i bought the vanwurks one and returned it as the shallow one was to shallow and the deep one was way to high cant seem to find one to work with lino