Club 80-90 Forums

Help please in identifying and sourcing parts
1990 Bluestar
1600 TD
Please could anyone advise me where to get the unions for the turbo to oil filter of the oil pressure pipe.( runs down the side of the engine block)
I have the pipe but need the unions and they were discontinued 2009 by classic parts.


Any help greatly appreciated, don't want to remove seeping union till I have the parts


Cheers

Not sure exactly but it's 17mm you can get the full kit here, are yoiu using flexible pipe? if not note the P clip to stop it cracking
http://www.brickwerks.co.uk/shop?page=s ... o+oil+feed" onclick="window.open(this.href);return false;

Thanks Hacksaw Bob

I have all those bits bar the clamp but reading the fitting notes its the adapter that is also screwed in to the turbo and the filter that i feel may be cracked, the turbo end is just corroded in and having tried to undo the union and the adapter/collar below is where there is a leak and the pipe seems unstable .
I feel if it has not already cracked it will shear on further tampering so trying to sort part and then take it to Old Boy to rectify.
Sorry for the poor description and being abit of a plank.


so any further help on sourcing greatly received


Thanks for your time


J