Club 80-90 Forums

Hi Guys,

I've read some of you like to use a Dremel to clean the seams out. What model would you recommend and which bit do you use?

Cheers,
Tim.

I've done that. Model is irrelevant really as they'll all do the job.

I used the little grinding disc. You will use 1 or 2 on the average seam (if there ever was an average seam) works out about £3 a seam!

I have a project posted somewhere on here that shows me using it (I think) not sure how to send a link as I'm on my iPhone not laptop.

Jon.