Page 1 of 1

Problem with 5th Gear on T25 1.9DG 1990

Posted: 02 Jun 2012, 09:39
by markb
I have a problem with 5th gear where once it is selected and I take my hand off the gear stick it pops out of gear - if i hold the gear stick it stays in gear - any ideas? Linkage? Gearbox? Was going to go away for the weekend! Not now!!! :(

Re: Problem with 5th Gear on T25 1.9DG 1990

Posted: 03 Jun 2012, 18:31
by billy739
run through the linkage , but probably a worn gearbox

make sure the stick dosent hit anything when in place

Re: Problem with 5th Gear on T25 1.9DG 1990

Posted: 06 Jun 2012, 12:52
by markb
Any idea where I can the parts to rennovate my gearbox - I am told the shaft for 5th Gear must be worn!

Re: Problem with 5th Gear on T25 1.9DG 1990

Posted: 06 Jun 2012, 13:54
by Aidan
chances are the mainshaft bearing is worn and may also have moved in the case, there may be damage to 5th gear and to the synchro hub and slider parts and the synchro ring will be worn, maybe wear on the fork and or broken selector fork shaft bearing(s)
it's a full rebuild job and chances are there will be other worn parts to replace too

Re: Problem with 5th Gear on T25 1.9DG 1990

Posted: 20 Jun 2012, 13:57
by markb
Aidan can you please contact me on 07773822893 with regard to my parts order so that I can arrange a bacs payment. I have tried telephoning you this afternoon as you requested but have not been able to get through on either your landline or your mobile!