Club 80-90 Forums

Just bought a Sportscraft swivel base and was going to bolt it in, but once I offered it up lining up with the existing holes in my vans seat runners my battery box cover will be unable to open, the swivel base covers it over by about 3 inchs so got no way once it's all fastened in to get to my battery, am I Bering a bumpy here and missed the obvious?

You will have to remove the box cover.

Is this the normal thing?

Yes it is.I fitted a genuine vw swivel on mine.And i had to remove the cover.I believe half size covers were available.You could try chopping yours i suppose.

Obvious but, take it going to have to remove the swivel to change the battery.... Bugger!

Thats the problem with swivels.Mine is a genuine vw one.And i would of have to unbolt it to get to the leisure battery.So i moved the battery to the bottom of one of my cupboards.

What a royal pain in the a***, the passenger side is where my main battery is, as it a German Firetruck.

Now that is a pain in the posterior.

if you swivel the seat fully round and push the seat all the way back on its runners the battery can be removed easily as long as you have fastened your bottom swivel plate flush with front of seat box

^^^ what he said^^^

Mine's welded in, with the seat fully swivled and pushed back i can remove the battery easily


Dave

I will take a pic later so you guys can see, yes its flush up to the front end and no way that the battery can be removed with it bolted in place.