Club 80-90 Forums

I have a 1.9 DG with the early type exhaust (if that makes any difference)
I have recently had buzzer of doom issues, and managed to stop it by playing with the disconnected wires in the back as its most likely to be a faulty sensor.
I want to replace both sensors / switches but not sure which two I need as there are blue, black, grey and white.

Any help with this would be great

Cheers
Tim

Get the oil pressure checked properly ... the original VW sensors do not actually fail as often as people would like to believe.

What oil are you using ?

Ian

Poseidon wrote:I have a 1.9 DG with the early type exhaust (if that makes any difference)
I have recently had buzzer of doom issues, and managed to stop it by playing with the disconnected wires in the back as its most likely to be a faulty sensor.
I want to replace both sensors / switches but not sure which two I need as there are blue, black, grey and white.

Any help with this would be great

Cheers
Tim

they are switches not sensors.

In the haynes manual are the pressure switch values.
low,low pressure switch 0.3 bar blue
line pressure (high) switch 0.9 bar grey
All available from Brickwerks
Locations?