Page 1 of 1
Is it possible?
Posted: 08 May 2012, 21:31
by Sw:sbp
Hey, just bought a Doka and would quite like a rev counter rather than a clock? Is it possible, does anyone know what is required?
Cheers. Neil.
Re: Is it possible?
Posted: 08 May 2012, 22:12
by Sw:sbp
okay, having searched before posting I couldn't find anything, now I realise that i might be crazy. I have a wbx engine on a F plate (I think) and would have to buy a dash pod with a working rev counter from an existing petrol T25...then something to do with the alternator or coil or something....
madness. Well onward and upward. I'll not let it deter me. Any ideas or clarification?
Cheers. Neil.
Re: Is it possible?
Posted: 10 May 2012, 23:16
by billy739
post 86/7 petrol van then a rev counter dash is a straight fit.
same as 86/7 disel dash
early 1.6 d and petrols did not have wirte to dash from engine
but you can fit the wire and if you have vertical dash plug you need to move some wires about on the plug
for reference year , engine type and size would be very helpful
Re: Is it possible?
Posted: 11 May 2012, 13:23
by Hacksawbob
a wbx engine on a F plate
post 86/7 petrol van then a rev counter dash is a straight fit.
so that is a yes just fit the dash with the tacho and away you go by the sounds of it.
Re: Is it possible?
Posted: 11 May 2012, 23:56
by lhd
Yep have done it myself, although on a diesel.
Rob.