Page 1 of 1
inlet manifold gasket
Posted: 05 May 2012, 15:18
by garyharbord
Hi the inlet manifold gasket on my 1.9 df was replaced with a 2nd hand one last week and has split again causing it to misfire again. Ive ordered a new one from brickwerk and can see the 4 nuts holding the gasket to the manifold but cant see any nuts holding carb to gasket. any ideas of how carb comes off from the gasket?
Cheers
Gary
Re: inlet manifold gasket
Posted: 05 May 2012, 17:12
by CovKid
Nuts that hold the air cleaner on as these hold the carb on? Sorry, you're not explaining this too well.
Re: inlet manifold gasket
Posted: 05 May 2012, 18:58
by garyharbord
Sorry try and be a bit clearer. Its a solex 34 carb i can see 4 manifold gasket bolts holding gasket to manifold but cant see any bolts holding the carb to gasket. Are you saying the singe nut that holds the air filter to carb also holds the carb to the gasket.
Thanks for your help as always
Gary