Page 1 of 1

heater blower

Posted: 13 Nov 2005, 18:56
by diviy
tips for changing it ???? :( :( :( :(

Posted: 13 Nov 2005, 19:38
by T'Onion
Its a dash out jobbie (if you didnt know)

Posted: 13 Nov 2005, 19:41
by T'Onion
sorry that was a "pooh" reply :oops:

a good pair of mole grips and a wide drive or road cos both doors have to open to remove the dash,
don't forget the little screws near the windscreen .
it should take about an hour to remove the dash,

Posted: 14 Nov 2005, 20:12
by Ivorblueun
when i did mine the two halves of the flap box that it sits in were stuck together it took a bit of patience, sharp thin blade and a few choice words to get it seperated. Apart from that and the 2 security bolts on the steering column upper bracket its pretty straight forward if you have a haynes manual it will help in locating all the screws etc

BOLTS

Posted: 14 Nov 2005, 20:50
by TOMMY THE CAT
Pres you need new shear bolts where are these available?
TA

Posted: 15 Nov 2005, 18:12
by NeedABus
I just put the old ones back on!