Club 80-90 Forums

Hi. My 85 Autosleeper has a swivel seat on the passenger side, but I was wondering if anyone has fitted one to the drivers side?? Ive had a look and the handbrake looks like it would get in the way, is their any way round this??
Cheers
Dave Crackers

We have a bolt-in swivel on both front seats, the driver's is a tad fiddly and involves the seat going right back, armrest down and quite low and the handbrake being off/only just on (until it was adjusted low before the mot). I can't comment on the Autosleeper interior but our homebrew leaves enough room to swivel to the '7 o'clock' position making all the front of the cab usable.

Ian

Standard on westys, Mine is being removed though as I need the 3cms of head room they take up, also as Ian said a bit of a faf.

I think most conversions fitted them to both sides otherwise the seats are at different heights and look 'odd'. The handbrake can be a P.I.T.A but I just let it off and keep my foot on the brake till it's swivelled past and then reapply the handbrake.

I have an 86 autosleeper and both front seats swivel. The drivers seat can't go full 180 degrees as the units are in the way but with a bit of jigging about opening doors, tilting and sliding, it turns 90 degrees. This way someone can sit at the small table that fits between the seats.

There's a pic in here -

http://autosleeper.vwt25camper.info/198 ... hureWM.pdf" onclick="window.open(this.href);return false;