Club 80-90 Forums

hi there.
trying to change metal pipe from water pump to thermostat. and one of the allen bolts is rounded off.
looking to remove water pump....to get better access to bolt//.are there 3 bolts holding pump on??? the one behind main crank pulley looks awkward to get at..?
have removed water pump pulley

do you need to remove the big pulley as haynes manual not that clear.

any help appreciated

verat25(cardiff)

peter 07807213009

3 M8 nuts & washers (13mm socket) there is one that's a barsteward and a 'wobblehead' short extension is helpfull.

No that uncommon for a bolt to round off

Ian

thanks ian
will give it a try tomorrow.

peter