Page 7 of 13
Re: Syncro xrissvagon
Posted: 14 Oct 2011, 07:40
by Mickyfin
Whoops,

Re: Syncro xrissvagon
Posted: 18 Oct 2011, 10:14
by Plasticman
Well got da'd off and etched and primed etc, will be wet flatting and applying a thin bead of sealant in the seams then more paint, but looking quite good as we speak

this area is now nice and clean looking

slider rails looking healthier

this now looks as it should with the pillar pulled out

not very interesting pickies, see one van in primer and they all look alike,, doors are hung in the other booth along with the side planks etc
mm
Re: Syncro xrissvagon
Posted: 18 Oct 2011, 10:43
by lloydy
Lovely
Can't wait to see this and kevs
Re: Syncro xrissvagon
Posted: 18 Oct 2011, 17:17
by kevtherev
indeed mate ... I could trawl through this thread for hours..
Re: Syncro xrissvagon
Posted: 20 Oct 2011, 11:12
by Plasticman
Well finaly got it all in u coat and flatted and so forth

seems to have come out ok , just got the seams to seal and a final thin coat prior to gloss
new rear arch

os front arch

wiper drives are still in but shrouds and such are out of the way so paint gets in ok , washers are sacrificial as I dont want to loose the pipes,have new vw ones to fit back

tailgate is happier with itself

and badge/logo area is nice

this is the replacement red door that we repaired

and this is the modified bit for the lecky mirror

and not forgetting that the full set of sideplanks/bumpers had to be reworked as they had split and were really badly painted, they wont be perfect but will be 100%better than they were, sample bit here as no point pickying every part...

So this is as near as dam it 5 days work since the repaired/filled stripped part of the job
mm
Re: Syncro xrissvagon
Posted: 20 Oct 2011, 11:28
by Titus A Duxass
Looking good.

Re: Syncro xrissvagon
Posted: 20 Oct 2011, 12:25
by waltraud
Wow, that's what i call a proper job, do you do any rustproofing of the interior seams/edges of panels or leave that to the owner or are you the owner and leave it alone? I'm always intending to cut back the old underseal and clean, vactan and seal the inner seams but it never sems like an attractive job at all. Perhaps that's one of the many diferences between a hobbyist and a proper job, i.e. i can afford not to bother if i like.
Re: Syncro xrissvagon
Posted: 20 Oct 2011, 21:18
by Plasticman
Yes , clean off, however you can, and treat and waxoyl equivalent, do as much as you can to the insides.
mm
Re: Syncro xrissvagon
Posted: 24 Oct 2011, 09:17
by Plasticman
Well a few tasters of the van in gloss, done in Imron Elite.
n/s step and A post bottom

o/s f arch b post area

o/s rear wing, bottom part is the bit I made , arch is the factory replacement

rear of same

n/s rear 1/4 area (the leaded up bit)

top of same area

repaired rear lower valance

tailgate badge area
more to follow
mm
Re: Syncro xrissvagon
Posted: 24 Oct 2011, 09:36
by Mickyfin
Coming along nicely there mate! Impressed.
Dumb question for you though, whats this hole, and bracket for? Itrs just that im missing both my rear mudflaps, and was wondering if these were related, as I don't have either.

Re: Syncro xrissvagon
Posted: 24 Oct 2011, 09:44
by Titus A Duxass
Mickyfin wrote:Coming along nicely there mate! Impressed.
Dumb question for you though, whats this hole, and bracket for? Itrs just that im missing both my rear mudflaps, and was wondering if these were related, as I don't have either.

The bracket is for the big bumpers (carat), can't help with the hole.
Re: Syncro xrissvagon
Posted: 24 Oct 2011, 10:17
by Mickyfin
Ah right, ok, cheers

Re: Syncro xrissvagon
Posted: 28 Oct 2011, 21:44
by Plasticman
Well its painted, lad did good so wont be sacked this time, ( put the bu**er on a warning to keep him on his toes though , as he's got a morgage)
slider, prior to refitting

o/side door

rear end is looking nice and clean

washers are sacrificial to save loosing the tubes, screen aperature is and was mint

bit of a tease picky , forgot the flash but happy with the seam and alignment

now the skirts and bumpers were as dismal and miserable as any you will see with loads of cracks and painted by a robot with iffy programming and stood in the wrong room as it tried to apply the rancid paint, these were stripped back and repaired as best as can and whilst they cannont be guaranteed, they do look more like painted steel than plaggy

and

they ae painted white first and then taped off to apply the black , its really the wrong way round as its hard to mask inside curves and get a clean line , be easier to paint black and then tape up and apply the white ......anthow they look nice , should do as they took over a day to do
this is the n/side nice and straight , very happy with how its turned out so far

mm
Re: Syncro xrissvagon
Posted: 28 Oct 2011, 22:02
by lloydy
perfect

Re: Syncro xrissvagon
Posted: 28 Oct 2011, 22:05
by Plasticman
Ta, its a really edible looking colour

just cleanand a nice foil to re=apply the decals and all the nice stuff and the dinitrol and well its going to ba nice one to put back together but hell there is a lot of it , loads of silly electrical stuff...... oh and the sunroof to change and and and . he he
mm