Club 80-90 Forums

armyphil wrote:

syncropaddy wrote:

armyphil wrote:
Balls, I've had a syncro and only been driving in 2wd drive. Mine didn't come with the 4wd button

But did you get holes in the dashboard?

Not yet but I'm getting my drill out this morning, it's the new cherry part

I've got a box of metric holes here you can have, various sizes.

Depends, on some RHD's they fitted imperial sizes.

Well done Cooper (and your dad and McGill of course
Think you maybe got a goodie there

Been everywhere to day in the syncro. Love ut. Although i did bump over a few bollards in car park n thought id f*%ked up the wheels but its ok

You actually drove over some bollards (hope you mean curb, bollards are bloody big!) owning a syncro does not allow you to drive offroad whenever you wish

Glad your enjoying it!

However I still want to see some more photos!

Well these bollards are the ones that fold down. But still chunky.

What ill do is take some pics tomorrow and load them up.
Peter t:)

X

Perhaps you need a bullbar?? or is that as un p.c. as big lights and a winch??

And all in 2WD as well ....

Syncrobaz wrote:Perhaps you need a bullbar?? or is that as un p.c. as big lights and a winch??

& to learn to drive!!

Syncro G wrote:

Simon Baxter wrote:Ex yorkshire water van by the looks of the reg no.

Exactly what I was thinking.

Definately!!! mine is J897KCP and came from yourkshire water.............remember test driving j895kcp as well before we got it and the panel van that surfaced last week on ebay for 5 grand was j899kcp...........

Right need some help!

Druvers door wont lock or unlock with key. I have to unlock passanger door to get it.

Dr door does lock from inside.

I need to know how to get the window handel off the speaker off and the door pull handel off.

Looked in my manuel doesnt say anything an niether does wiki.

Door pull has small and large Phillips screws underneath the two little flaps - one either end - which can be opened with a very small screwdriver. Window winder is easy. At the end where its attached to the door the plastic pulls away to reveal a phillips screw. Leave the speaker alone as it should be attached to the door card.

Cooper this is kindergarten stuff compared to most stuff on a Syncro. If you cant work this type of stuff out on your own you have a VERY long road ahead of you.

syncropaddy wrote:Door pull has small and large Phillips screws underneath the two little flaps - one either end - which can be opened with a very small screwdriver. Window winder is easy. At the end where its attached to the door the plastic pulls away to reveal a phillips screw. Leave the speaker alone as it should be attached to the door card.

Cooper this is kindergarten stuff compared to most stuff on a Syncro. If you cant work this type of stuff out on your own you have a VERY long road ahead of you.

Cheers:)

Never before getting this syncro have i even sat i one so trail n error.

Its going great. Fitted the stearo. Had to rewire n older stuff but all good.
Getting brakes and gear stick looked at soon.

Surely brakes should take priority over fitting a stereo