Page 4 of 4
Re: rear trailing arms
Posted: 09 Mar 2010, 19:01
by axeman
2 nuts welded in 1 for a p clip for the copper break line and one just in case i ever put disks on the rear as a clip for the relocated hand brake cable.
Re: rear trailing arms
Posted: 09 Mar 2010, 19:02
by axeman
and one for luck. slowly getting the hang on this computer lark......
Re: rear trailing arms
Posted: 09 Mar 2010, 19:13
by axeman
just going to decide how to finish them paint or plate, ordered new bushes from tps on friday so got to collect them.
so all looking good.
i have finished with the welder now doug so it's waiting for you when ever your ready or untill we sort out somr transport for it. if nothing happens before germany i could bring it with us let me know,
adian should i bring the trailing arm that i used as atemplate to germany as well?
neil
Re: rear trailing arms
Posted: 09 Mar 2010, 19:33
by Aidan
Neil,
I'm sure a better opportunity to move them will occur, Andy Mc passes here periodically, or at least will do so when his current work overload lightens and sp7 will do fine or a welsh laning trip