Club 80-90 Forums

what choice of colours are there mm?

black rubber to match the seal as in pickies above then
in pvc/satin/sheen (nearly wrong forum !!!)we have
black
white
yellow
red
silver chrome
alluminium
that enough
mm

cheers mm, food for thought, satin red with black would look quite nice.

yes very tarty, lol
mm

it would match the leopard print interior

Well last few bits of the exterior,
n/s slider cover area dynax'd

now when a previouse crew blew it over they had the decency to unscrew the water filler, ....just enough to poke an angle grinder in there and in the process cut the filler

the hole will have let water run into the panal and down to the C post and jp area. not the cause of this vans ails ,but didnt help
so to the rescue

this stuff is good and the top is turned to metre it out,self pumping and keeps for over a year
applied to filler

hole prepped,

and now fitted

more sloppy work from the past lazy lot

better now and fitted with nice sec' screws

gas fill hole,same treatment

part 2 in a minute when p**sbucket wakes up
mm

Hmm
filler fitted and all dynax'd up

fuel orifice same

its surely got to help things if this is behind all the fittings?

all cleaned up and sorted

and lastly the ladder refitted with SS fittings and adh tape so nice and solid

so an hours work on the exterior and then its onto the interior
mm

That petrol filler cap needs a before and after shot. You have no idea how excited we get waiting for 7pm ish to see if pics are on their way - not sure what we'll do when your finished. I suppose we'll be just staring at the seams from the kitchen window, making the email alert noise to check the van

van is going to look a million dollars when finished

Happy now ? 8 and a half hundred pickies ,thought it seemed like a big-ish job
mm

That's the one

What an epic......hats off to you once again MM.

850 pics and nearly 8500 views

Legend.

LittleMissSunshine wrote:850 pics and nearly 8500 views

Legend.

Legend? That'll be a foot! (leg end).