Page 3 of 3
Re: T25 Starting fault
Posted: 22 May 2011, 08:43
by kevtherev
PorkchopII wrote:
Should the filter be between the tank outlet and small plastic hose??
From the tank, just a short length of hose (8") then the filter then fuel hose
Re: T25 Starting fault
Posted: 23 May 2011, 11:53
by PorkchopII
So after the filter should I run the same fuel hose all the way to the fuel pump??
Re: T25 Starting fault
Posted: 23 May 2011, 12:53
by Ian Hulley
PorkchopII wrote:So after the filter should I run the same fuel hose all the way to the fuel pump??
The filter is in a sandwich of flexy fuel hose so the complete system is ... tank outlet, hose, filter, hose, plastic pipe, hose, pump, hose, carb, hose, plastic pipe, hose, tank inlet.
Re: T25 Starting fault
Posted: 23 May 2011, 15:17
by Mocki
dont be tempted to run rubber hose all the way from filter to pump, unless the plastic pipe is damaged, you will regret it - the rubber hose needs frequent replacing, and is the single most cause of engine bay fire in older vans, especially Aircooled.
Re: T25 Starting fault
Posted: 25 May 2011, 08:16
by PorkchopII
What size hose do I need and where is the best place to get it??