Page 3 of 3

Re: header tank

Posted: 29 Mar 2010, 18:50
by Ian Hulley
Yep, sorry ... Mr Baxter's guidance :wink:

Ian

Re: header tank

Posted: 29 Mar 2010, 19:03
by simony
ian have pm,d you

Re: header tank

Posted: 31 Mar 2010, 18:55
by meridian911
well just in case anyones interested i've had the coolant sniffed at a garage today and there's no sign of any gasses in the coolant. :D so i guess i'll try the latest new cap from brickwerks and a good bleed of the system tommorow.
The new cap from brickwerks does look slightly diffent to the last one from them, the tops kinda flat where as the other was a bit rounded.

Re: header tank

Posted: 01 Apr 2010, 05:32
by simony
any different ?

Re: header tank

Posted: 01 Apr 2010, 21:07
by meridian911
seems to be fixed :ok bled the system on ramps as well for good measure

Re: header tank

Posted: 01 Apr 2010, 21:45
by Ian Hulley
Well done, I hope you realise that you can't bleed the T25 on a slope ... according to some. :lol:

Just to be warned, check your van both ways up. After filling from the rear ( :oops: ) I always like to get the nose in the air and check the rad too.

Ian