totally rusted rear wheel arch - replacing
Posted: 08 Jun 2008, 09:52
yeah , am seriously considering gluing (!) 
the repair panel on the outside with this evostik metal glue i found in halfords yesterday , tested it and works fine on 1 mm sheet , so plan a is glue with a smear of seamsealer along edges , and the odd spot and lap weld , with an attempt at filler to smooth it in ; titass is right tho , booger to hide the join .
So plan b would be to find a way of slipping it inside and yet retain the end of the sill/rocker- but may still use the glue .
Also , welding will be a noightmare from inside , unless i cut away some inside panel and stiffener and reweld it later , these repair guys REALLY earn their money .
jaylo
the repair panel on the outside with this evostik metal glue i found in halfords yesterday , tested it and works fine on 1 mm sheet , so plan a is glue with a smear of seamsealer along edges , and the odd spot and lap weld , with an attempt at filler to smooth it in ; titass is right tho , booger to hide the join .So plan b
would be to find a way of slipping it inside and yet retain the end of the sill/rocker- but may still use the glue .Also , welding will be a noightmare from inside , unless i cut away some inside panel and stiffener and reweld it later , these repair guys REALLY earn their money .
jaylo