Club 80-90 Forums

Posted: **19 Jul 2025, 18:22**

Hi Clift_d
Please can you send me the manual aswell.
thanks v much
Dave

Posted: **20 Jul 2025, 06:52**

Water pump belt tension is adjusted by adding/removing shims from the middle of the pulley. To increase tension, undo the three bolts holding the pulley on, take off the outer, pop a shim out and re-assemble. Run the engine briefly to let the belt settle in the pulley and re-tighten the bolts.

Posted: **21 Jul 2025, 09:05**

klabbeklas wrote: ↑18 Jul 2025, 12:10 Would you mind sharing the manual with me also?

dcworm57 wrote: ↑19 Jul 2025, 18:22 Hi Clift_d
Please can you send me the manual aswell.
thanks v much
Dave

You both have a PM...

Posted: **24 Jul 2025, 10:05**

Could I also ask for a copy of the jx manual please

Sent from my iPhone using Tapatalk

Posted: **24 Jul 2025, 12:46**

You have a PM...

Club 80-90 Forums

JX 1,6 TD Twin Belt Setup

Re: JX 1,6 TD Twin Belt Setup

Re: JX 1,6 TD Twin Belt Setup

Re: JX 1,6 TD Twin Belt Setup

Re: JX 1,6 TD Twin Belt Setup

Re: JX 1,6 TD Twin Belt Setup