Page 2 of 2
Re: What do I need for this 'box?
Posted: 07 Jan 2012, 19:06
by billybigspud
Plastic ones make your van go 150 mph faster

Re: What do I need for this 'box?
Posted: 07 Jan 2012, 20:13
by ermie571
hmmmmm....if you have metal grills the van is truly early, and is a good indication it was originally air cooled.
Em
xx
150mph faster.....hmmm...sommar wrong with mine then....
Re: What do I need for this 'box?
Posted: 07 Jan 2012, 21:29
by Plasticman
this is early= metal

mm

so what you got
Re: What do I need for this 'box?
Posted: 07 Jan 2012, 23:09
by serenitycamper
Oh I see!!! Finally I get with the programme
150mph huh? Wow...I wonder how many panels would be left after 110mph?

Re: What do I need for this 'box?
Posted: 08 Jan 2012, 09:36
by Aidan
if metal then 100% air cooled originally by the time the diesel engines were offered they'd gone to plastic as they had to modify the air intakes I guess for the diesel or the use of the metal panel was causing distortion to the shell or the pressing of them had too high a remake rate
Re: What do I need for this 'box?
Posted: 08 Jan 2012, 12:37
by Plasticman
could be right there Aiden, funny panal to press, anyhaow mine is derv, ok its been converted but youd not tell from the externals nor the engine bay,
mm
Re: What do I need for this 'box?
Posted: 08 Jan 2012, 16:17
by billybigspud
Bit of blacking out needed in them arches me thinks Mike.

Re: What do I need for this 'box?
Posted: 08 Jan 2012, 18:42
by Plasticman
Nooooooooooooooooooo.
mm
Re: What do I need for this 'box?
Posted: 08 Jan 2012, 21:00
by Aidan
change over was late Jan 81 build after that they had the plastic trim the very first diesels ran off the line at the very end of Jan 81 according to the engine dates
Re: What do I need for this 'box?
Posted: 08 Jan 2012, 21:02
by billybigspud
metalmick8y wrote:Nooooooooooooooooooo.
mm
Yup, you know it as well.