Page 2 of 2
Re: help im new :(
Posted: 17 Aug 2011, 13:31
by kevtherev
You haven't read what I wrote then...
it's controlled by the bi metal spring in the choke housing (No 28) on the schematic
Re: help im new :(
Posted: 17 Aug 2011, 13:52
by phatphish_123
i think it was just a bit jammed up kev , i took off the choke housing thing to see the thermo sring thingy , pushed and prodded the lever while holding the throttle open . put it all back together and she started a treat , reving higher than normal but then going down after a short warm up
thanks so much kev .
will get in touch again soon for a gear stick problem , but for now im off for a drive
speek to you soon
phish
Re: help im new :(
Posted: 17 Aug 2011, 15:02
by kevtherev
It's supposed to rev higher when cold
thats the cold start fast idle... Which is working.
Re: help im new :(
Posted: 17 Aug 2011, 15:07
by kevtherev
Do us a favour and E D I T the title of your first post to something more meaningful for when folks are searching for similar subjects
some thing like "Pierburg cold start problem"
thanks
kev
Re: help im new :(
Posted: 17 Aug 2011, 15:09
by phatphish_123
ok no worrys , thanks kev