Page 2 of 3

Re: 2.1 mv power loss

Posted: 13 Apr 2011, 07:17
by ..lee..
Ooo sounds painfull Andy. Lol. You staying etdi?

Re: 2.1 mv power loss

Posted: 13 Apr 2011, 07:41
by syncroand101
Do MV's have the idle stabiliser doobrey like the DJs?

Re: 2.1 mv power loss

Posted: 13 Apr 2011, 08:42
by axeman
Yes they do

syncroand101 wrote:Do MV's have the idle stabiliser doobrey like the DJs?

Re: 2.1 mv power loss

Posted: 13 Apr 2011, 09:50
by syncroand101
When my DJ played up, weird charateristics, like not starting, or sudden low power, it was that, if it is the square grey electronic (there are two types I think) one you ca bypass it by plugging the male and female into each other (fnarr). Not sure about the other style one and if has any effects like this..

Re: 2.1 mv power loss

Posted: 13 Apr 2011, 16:34
by Aidan
can't bypass it as no plugs to disconnect and plug together on the MV only thing would be swap out - Lee I have one in the van if you want it

Re: 2.1 mv power loss

Posted: 13 Apr 2011, 18:18
by ..lee..
well it was missfiring really bad tonight i checked fuel pressure and regulator fuel and timing all seemed fine. thinking it may be faulty plugs. will try bosch in tomorrow if that doesn`t fix it i`m taxing the delica and ripping the engine out. :lol:

Re: 2.1 mv power loss

Posted: 14 Apr 2011, 15:59
by syncrosimon
An ignition switch on it's way out can give these symptoms. The voltage being given to the ecu can vary as the resistance inside the switch increases and can give all sorts of problems. See what the voltage is at the coil when she is running bad.

Re: 2.1 mv power loss

Posted: 14 Apr 2011, 17:42
by ..lee..
i`ll give it a try simon thanks. tried another set of plugs today no joy.

Re: 2.1 mv power loss

Posted: 14 Apr 2011, 18:19
by Aidan
Do you want idle stabiliser control unit ?

Re: 2.1 mv power loss

Posted: 14 Apr 2011, 19:35
by ..lee..
i want a big sledge hammer, maybe some tnt " may have that sorted " and a feild so i can smash it to pieces and then blow it in to outer space. i`ll take the nice new dizzy and afm off first. promise. :lol:

engine is comming out next friday whether i fix the bloody thing or not i may be tempted to just try an isc if the ign switch tests good tomorrow i`ve subtituted the live to the coil but in the engine bay. ign switch is now my favorite and my best. :oops:

aidan can you text me your post code please i`ve got something for you.

Image


lee.

Re: 2.1 mv power loss

Posted: 14 Apr 2011, 19:47
by axeman
are you making a 8wd syncro lee?

neil

Re: 2.1 mv power loss

Posted: 14 Apr 2011, 20:17
by ..lee..
:rofl


i`m not that f*****g mad. hows the bug shorty. :ok

Re: 2.1 mv power loss

Posted: 14 Apr 2011, 20:33
by syncroandy
Nice clean boxes. What were they blasted with ?

Re: 2.1 mv power loss

Posted: 14 Apr 2011, 20:44
by footstuck
I wonder if that engine bracket will allow the fitting of a VNT?
Will have a looksee and let you know.
That engine is looking good mate,
sad to think what a good mudhole is going to do to it.

Re: 2.1 mv power loss

Posted: 14 Apr 2011, 21:18
by ..lee..
compulsive disorder, genuinely cant help myself should have thrown the bloody thing in ages ago. boxes done with washed sand.