Page 2 of 2

Re: 009 replacement by Electronic ignition

Posted: 10 Dec 2010, 12:44
by orangebooboobearcrew
Don't buy the dizzy replacement bits from JK - particularly the hall sensor. It has the wrong size wiring plug on it and can't be modded so unless you've got the old plug which you can transfer it is useless and a waste of £60 - £70!! I know first hand from bitter experience - including spending several hours trying to 'frig' the plug to fit

Get the right one from Brickwerks. Bit more expensive but it is the proper part and will do the job properly - not the "pooh" that JK send out...

Thanks,

Chris