Club 80-90 Forums

I removed the old Autohomes & still have all the parts for it. Including roof cap, gas struts etc. The whole roof or individual parts are available to anyone that wants them. I looked at allsorts of new roof options. There is a place in Dorset that sells brand new roof caps at £1200 a throw & this does not include gas struts, seals or side panels etc. So a very pricey option. http://www.autovan.co.uk" onclick="window.open(this.href);return false; The best option if you decide on the hightop roof is timber technicians although I have seen a few secondhand ones on ebay for as little as £35. Remember if you buy a secondhand one though you may need to consider costs of a a respray & general tidying up. I much prefer the look of the pop tops & looked at loads of options. A good place for secondhand Westies is http://www.thebushaus.co.uk" onclick="window.open(this.href);return false; £500. I did see a few other types on ebay. However I was lucky enough to buy a Viking roof from a fellow club80-90 member. He bought the roof & then changed his mind as he's now currently building an electric Danbury type roof which I'm very interested to see the end product. I am in the process of fitting the new roof but the weather has delayed the work. Looking at January now before I'll fix it on properly. It's currently just sat on top.Let you know how tricky it is to fit once I've done it. The biggest problem I have so far is that the old roof hole is bigger than the steel angles that will edge the new roof. I've had to get 4x steel angles made to extend to fix onto my van roof. This should solve the problem

Hey Jiffes
Cheers for all the info, in your experience do you reckon it would be possible to take off the roof cap, flip it upside down and replace all the timber ie chipboard?

I think it would be possible but quite a time consuming exercise. As long as the fibreglass cap is sound I cant see why not. Cheers Jiffies

Hi RebelT82 - my autohomes lid went the same way yours sounds like it has gone. Tried to find someone to fix it, even went to the original company - but no joy. Spoke to someone down our way who knew of another owner who had completly rebuilt his lid with new Ali etc, but did not cure the leak - it seems that the roof is not actually flat but is shaped.

In the end got a new fibreglass lid from a company called Autovan in Dorset - wasn't cheap but it works

Time to revive this old thread!

Like so many before it my Kamper pop-top will be meeting it's maker in the near future, well, when I've sourced the remaining bits I need for my Westy pop-top

What i'd like to try and find out is this: How much of the trim round the roof hole is it possible to retain? does this just stay in place or does it come away with the white plastic sides? In an ideal world I can leave this in place, and the back bed board and HOPEFULLY the westy roof would still shut flat.

Would be great to have some insight from those who have undertaken this task themselves!

Cheers,

Sam