Re: Modified my wheel arches
Posted: 31 Aug 2009, 16:09
Use a sat nav ...
Is your rev counter a standard one?
Is your rev counter a standard one?
Club 80-90 Forums
For owners and lovers of VW T25 (T3) Vans
https://club8090.co.uk/forum/
Modified my wheel arches
Page 2 of 2
Re: Modified my wheel arches
Posted: 31 Aug 2009, 16:12
Yes and I know you can adjust it. I am going to get the rpm from a timing light and adjust the rev counter to match.
Re: Modified my wheel arches
Posted: 02 Sep 2009, 21:40
syncrosimon wrote:slobbo wrote:Ahhhhh - Just back from a trip around Scotland and have discovered the wheels are now scrapping on the front of the arches when the wheel is turned slightly. Looks like some further fettering is required. Anyone else had this problem?
Yep, I had to pull the off side wheel forward a bit with the two 27mm nuts on the radius arm rubber bushings, this will effect the castor though. You will need to take the bash guard off to adjust. You need an open ended 27mm spanner.
When my suspension is finally finished I will get a 4 wheel alignment. My bus drives straight on the steering wheel, but wants to go slightly left if I dont hold the wheel since I did the bushes. I am now paranoid that I have not replaced something properly.
Simon.
I'd be interested to know how you solve this in the end, I'm having a similar issue
