Club 80-90 Forums

Didnt mean to worry ya bud,to be fair I havent seen the brackets yet, just felt the weight of it.
Deanos VWs are fitting like I said, give him a ring on 07890546824. He said that he had to take off pulleys and cam covers etc to change bolts.
All that said rest assured Richard Jones knows his onions and his products are recomended ,tested and proven before sale.
Mine is a simple Kenedy header with a transit 2.5Di downpipe flexi,centre box with baffle and 90 degree bend outlet.
This allows the exhaust box to be mounted from the rear cross member and the weight on the body. Sounds great too and is as quiet as a modern motor on tickover,retaining a standard look.[/img]

I have the Kennedy header with small car J pipe and silencer. Just a little too tame!

Hi,
Just taken delivery of a full RJES kit and I am blown away by how good it all is. The exhaust is quite heavy, but the mount kit is well up to the job and the way its sits off the back of the engine make a lot of sense.
Going to be fitting all the bits over the next few days, so I will let you know how it goes.
Jon

Will check it out when Deano has got it on. As I said, Richards products are usually well tested and thought out.
Cheers.