Page 2 of 2
Posted: 05 Aug 2008, 20:50
by irishkeet
hi edoh
this may help
https://club8090.co.uk/wiki/Ge ... air_Kit_01
edoh wrote:i have a really difficult to get into 1st gear problem that i've been living with for a while -
tried the above - and noticed that the middle section of the gear linkage has come / snapped off -
looks like a small piece of white coconut!?! type material holding / joining the 2 sections together -
does anyone know what this is? how to repair / replace? what its called would be a help! Plus - can i get a replaceemnt part anywhere?
as always - any ideas / hints gratefully received -
Re: greasing gear linkage
Posted: 05 Aug 2008, 20:51
by irishkeet
noss vanagon wrote:Just had the spare wheel out to check before a trip and while it was out I sprayed all around the gear linkage with white grease.
What a difference the gears are like slick sh.....
noss vanagon
thanks for the tip
did mine the other week, its like a hot knife through butter
Posted: 05 Aug 2008, 20:56
by edoh
a top link - thanks for that -
all well w the van - a local garage realigned linkage and replaced clutch slave cylinder that had seized - other than a toastie smell from the back - all good - nice to be mobile for the summer -
also useful -
https://club8090.co.uk/wiki/Ge ... _improving
Posted: 08 Aug 2008, 16:42
by AngeloEvs
Found the problem on mine, difficulty engaging first- going into reverse or third. Checked the entire linkage, got to the front linkage and discovered that the bolt securing the shift rod to the gear lever was 'loose' (understatement of the day!). No need to remove the housing, easy peasy
and I now have a brand new gearbox......feels like it anyway.
NB. Renewed the gearbox oil too, so many thanks to the wiki and Mocki, whose tips always include tea breaks......what a considerate fellow he is!
Posted: 10 Aug 2008, 10:31
by Fingle
I have a similar problem